spitfires
[Top] [All Lists]

Re: Door Handle replacement

To: gt6driver@yahoo.com, spitfires@Autox.Team.Net
Subject: Re: Door Handle replacement
From: KHOCO@aol.com
Date: Thu, 1 Oct 1998 13:09:28 EDT
John
             I don't bother with buying pins. I have a piece of brass rod the
same diameter as the pins. I taper one end of the rod and make a cut around
the rod to make it the same size as the pin. I then pry open the the area
between the door handle and the plastic peice, push the rod in, and snap it
off at the cut. Its
very easy. The brass rod can be had at hobby shops or hardware stores.

Ken Copeland  
70 GT6+ KC78784  

<Prev in Thread] Current Thread [Next in Thread>