Steve, you should be able to make an extension from a piece of rigid metal
conduit. It will be threaded on both ends & will need a coupling to connect to
the fixture. EMT conduit would probably be too light unless you only need an
inch or two extension.
Peace, Pat
Pat Horne
We support Habitat for Humanity
On Jun 4, 2024, at 11:39â?¯AM, Steven Trovato <strovato@optonline.net> wrote:
Outside my shop I have a typical flood light with two of these:
https://www.lowes.com/pd/Sigma-Electric-2-25-in-LED-Gray-Switch-Controlled-Floodlight/3136837
Is there any way to extend the part with the threaded end? Through some bad
planning, one of the lights is blocked by the gutter downspout. I would like
to extend it out from there. If the wires need to be longer I can figure out
how to do that. Whatever I do will have to be suitable for outdoor use.
Moving the downspout would be difficult. I can also relocate the whole light,
but some sort of extension arm would be the quickest and easiest solution of it
is possible. Thanks.
-Steve T.
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|