I've always had good luck with Loctite products:
http://www.loctiteproducts.com/glue.asp
Also, take a look at:
http://www.thistothat.com
chad
>
>
>
> I'm attaching some light metal pieces to
> thick leather. Afterwards the backside of the
> leather will not be accessible. I'm using a brad
> with a push nut. See here:
> http://www.mcmaster.com/#push-nuts/=198uxq
> it is very small (1/16" shaft on the brad). After
> installation, I clip the end of the brad as close to
> the Push Nut as possible so that the leather will
> be near flat when finished.
>
> Before closing the backside I'm thinking, for extra
> security, to add some sort of adhesive. I have
> hundreds of these to do, so I'm also looking to
> keeping it simple.
> My question is: what type of adhesive would best
> assure no movement of the Push Nut. I cannot afford to
> have it come loose. What I'm effectively trying to
> do is lock the Push Nut on the shaft of the brad.
> Any suggestions?
>
> Steve Hammatt
> Mount Vernon WA USA
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|