shop-talk
[Top] [All Lists]

Re: [Shop-talk] Airline Piping

To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Airline Piping
From: "Steve Hammatt, Mount Vernon WA USA" <gsteve@hammatt.com>
Date: Fri, 17 Aug 2007 20:15:11 -0700
I don't recall the brand that I have on my upright 5hp compressor, but
I know that I bought it from Grainger
http://www.grainger.com/
and it works on pressure differential.  When the pressure changes, it
dumps.  When the unit is idle, there's no activation of the bottom
water dump.  Had it for 6+ years with no problems.  However, when
you're in the shop and everything is quiet....and then it "burps"....it 
can
grab your attention!
Enjoy

Steve Hammatt
Mount Vernon WA USA
----- Original Message ----- 
From: "David C." <cavanadd@verizon.net>
To: "Kent Sullivan" <kentsu@corvairkid.com>; <shop-talk@autox.team.net>
Sent: Friday, August 17, 2007 7:37 PM
Subject: Re: [Shop-talk] Airline Piping


| Great idea.  Do you remember where you got it?
|
|
| At 06:11 PM  8/17/2007  -0700, Kent Sullivan wrote:
| >I really like the automatic tank drain that I have that's made by 
Granzow.
| >I've been using it for about 3 years now with no trouble. This is the 
one my
| >air compressor dealer recommended. It has a max delay between 
"blasts" of
| >about 45 minutes, which is fine for a commercial setting where the 
equipment
| >is in use a lot, but in my home shop that's more often than needed. I 
solved
| >that problem by plugging it into a lamp timer and having it "wake up" 
twice
| >during the night and fire off during that period.
| >
| >--Kent
snip 
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>