shop-talk
[Top] [All Lists]

Re: Bead blasting

To: "shop-talk" <shop-talk@autox.team.net>
Subject: Re: Bead blasting
From: Randall <ryoung@navcomtech.com>
Date: Sat, 05 Jan 2002 11:15:15 -0800
Bob :

Might help to tell us what wheel cylinders you have (steel, aluminum,
etc.), but in general I wouldn't risk it.  Wrap a turn of friction tape
around the pistons and stuff them in the holes.  Thread a bolt or spare
bleed valve into the inlet fitting.

Randall

BOB NOGUEIRA wrote:
> 
> I'm rebuilding the a brakes on my project car. The wheel cylinders look to
> be in good shape but have a lot of grease  etc on the out side. I was going
> to glass bead blast them but got to wondering if I should protect the bore
> and inlet pipe hole first . Will bead blasting the bores screw up the
> cylinder ?

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>