In a message dated 11/19/01 4:04:00 PM Central Standard Time,
jhouse@ccsol.com writes:
<< The plug, it was pushed out about 1/4 inch from the block on
the top and dipped into the block about the same space. I took an oak scrap
of flat wood and placed it over the plug and whacked it a few time with a
hammer. >>
I think you should install a new plug with permatex sealer. Local parts
store (NAPA) should have what you need. That's how I installed mine when I
did an overhaul, never a leak.
Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|