In a message dated 8/7/00 6:43:50 PM Central Daylight Time, Tom3600@webtv.net
writes:
<< I am switching my 216 from 6 volt (actually 8 volt batt.) to 12 volts. I
have decided to go with a 12V batt., 12V generator, 12V regulator, 12V coil,
12V bulbs etc. >>
Tom,
You may not need a 12V generator. I kept my 6V generator and after the new
regulator and other parts were installed, it puts out 14 volts and has held
up fine for 2 years. Try it out, the worst thing that can happen is it won't
work.
Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|