Or the silicone trapped moisture between the boards and the tank? Morgans
need plenty of ventilation!
Jerry
At 03:21 PM 2/16/99 -0600, hals@ix.netcom.com wrote:
>what a fancy way of mounting - with a bead of silicone - my old tank is just
>bolted squarely and firmly down to the wooden planks that form my back
>platform.
>mayhaps the tank needs that firmer support??, or the seal that was used
>would have let go regardless..
>
>
>On 02/16/99 08:51:17 you wrote:
>>
>>
>>I've just sent my 4/4 gas tank to the folks at Gas Tank Renu as it has
>>started to leak just one driving season into it's Lifetime warranty. I
>>assume this was due to a screw up during the "renuing" process, but I can't
>>help wondering if vibration may have caused this. The tank was mounted on
>>the boards with a bead of black silicone in between. Anyone know of a
>>better way to mount the tank to help reduce vibration?
>>
>>Regards,
>>
>>John
>>
>>59' 4/4
>>
>>
>>
>>
>>
>
>
>
>
>
|