I will weigh them tomorrow and report back.
Paul..the new motor comes with a y control cable going to one spade
connector on the new motor. One wire (red) has a diode which supplies
the 12v to the coil when cranking. It goes to the green white wire. The
diode prevents the ballasted 12v from the coil from backfeeding the
starter motor solenoid. The other wire (black)Â goes to the brown white
starter relay wire. It is described here.
https://www.youtube.com/watch?v=qJ9TQYfliLI
Mark
On 01-Sep-21 8:51 AM, Robert's New iPad wrote:
> Did you happen to weigh the two? To judge by size, weight of the new
> one could be a bit over half that of original.
> Let us know how installation goes, and how the new device works.
> Bob
>
>
>> On Sep 1, 2021, at 8:18 AM, Mark Robinson <markrob@mindspring.com> wrote:
>>
>> My new starter motor arrived. It looks like it will be a lot easier to get
>> this one back in place. Here are a couple of pics to show the difference in
>> size.
>>
>>
>> https://www.mediafire.com/view/y8sxmfctchksp3x/DSCN3677.JPG/file
>>
>> https://www.mediafire.com/view/1usnjxpgee8x1qs/DSCN3681.JPG/file
>>
>>
>>
>>
>> _______________________________________________
>>
>> Mgs@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
>>
>> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|
