As others have suggested, welding a regular nut to the end of the offending
locker can work. If you don't have a welder handy, cutting a groove in the
end of the locking nut and using a hammer type impact driver can also do
the trick.
But then again, since it is an MG, you could just ... naw, won't show my
Triumph bias.
mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|