A cutting wheel on a Dremel?
Simon
On Sat, Nov 21, 2009 at 2:14 PM, Woerpel <dwoerpel@wi.net> wrote:
> A friend bought a '76 MGB with Rostyle wheels and wheel locks and....no
key.
> The locking wheel nut has 3 grooves on the outside of the nut running the
> long axis of the nut. The grooves are spaced a specific distance apart and
> accept a keyed socket to remove the nut. So if one doesn't have a key how
> does one remove the nut? The rib of the wheel won't allow a grip type
> wrench. A cut off wheel won't get to the taper of the nut. Is there a
> place to purchase a key?
> Thanks for any assistance.
>
> Dave W.
> 59 MGA 1500
> 59 :{)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|