The manifolds are pretty much interchangable. If he needs a port
from the manifold, then screw one in, otherwise, a plug.
Exhaust manifolds aren't available new, but are pretty plentiful on
eBay. Otherwise, there are many different headers available from
retailers or eBay.
Emjaxfl@aol.com wrote:
> OK, the list has checked my memory. What can I say but middle age.
>
> Another thought. What kind of distributor is Keith going to use? Does he
> need manifold or ported vacuum? The original US 1979 used manifold but
> the common replacement Lucas 41427 uses ported.
>
> For ported, he will need an HS manifold and carbs; for manifold he will
> need HIF manifold and carbs. Some parts are getting harder to source,
> as has been mentioned. Also he will need an exhaust manifold if he still
> has the original intake/exhaust combo manifold.
>
> I suppose this is why do many people use the Weber DGV; they are
> mucheasier ti buy and install but IMO require much more work than SUs to
> get them jetted and set up properly.
>
> My two cents,
>
> Eric
--
Paul Root
"Few people know what to do when hula girls attack." - Sam, age 8
|