Oh Norm, now you've gone and done it! ;^) People who've never tried
it are going to come out of the woodwork and scream that it's easier to
remove the tranny too.
If all I was going to do was replace the clutch, I'd leave the tranny
in the car too.
Cheers,
CR
twobees@sprynet.com wrote:
>
> C - You DO NOT need to remove the trans with the engine. Everyone
> said it would be very difficult to align the splines on the
pilot shaft with the clutch disc. However, on almost every
installation, I was able to get perfect alignment on the very first try.
|