Steve,
That makes sense that it would slow down the draining. I just looked in the
shop and I have a MitiVac instead of an EzyBleed. So you think I replace
everything with the cellophane on, then remove cellophane and let the
MitiVAc do its thing?
Thanks,
Monte
From: "Steve Shoyer" <Steve@shoyer.com>
To: <mgs@autox.team.net>
Sent: Friday, March 07, 2003 7:32 PM
Subject: RE: brakes
> I think the celophane trick is supposed to stop the brake fluid from
draining when you don't want it to, such as when you're changing a flexible
brake hose. The celophane goes on top of the opening and then the cap is
screwed down on top of it. It works pretty well.
>
> If you're using the Eezi-bleed, remove the celophane.
>
> --Steve
>
> -----Original Message-----
> From: MonteMorris [mailto:mmorris@nemr.net]
> Sent: Friday, March 07, 2003 7:43 PM
> To: MG list
> Subject: brakes
>
>
> ... Someone previously suggested cellophane over the brake master cylinder
fill cap hole
> to slow down the draining of the fluid (for what reason escapes me). ...
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|