Easier than that, mine have arrows and the word UNDO.
However I did have a spinner that I had to cut off once, just after my
'mechanic' put the wheel on....
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of Telewest (PH)
> Sent: Thursday, November 07, 2002 9:11 AM
> To: Dean T. Lake; mgs@autox.team.net
> Subject: Re: Forwarded: Top worst jobs
>
>
> Mine have different angles on the faces of the spinner
> 'wings' - the 'off' face is aligned more-or-less with the
> centre of the spinner and the 'on' face more-or-less with the
> edge, presumably to give more 'leverage' when undoing.
>
> ----- Original Message -----
> From: "Dean T. Lake" <dtlake@erols.com>
> To: <mgs@autox.team.net>
> Sent: Thursday, November 07, 2002 3:01 PM
> Subject: Re: Forwarded: Top worst jobs
>
>
> > Are you absolutely sure you are trying to spin it in the correct
> direction?
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|