mgs
[Top] [All Lists]

Re: Coil Markings

To: "Scott Allen" <scottinarl@hotmail.com>, <mgs@autox.team.net>
Subject: Re: Coil Markings
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Wed, 24 Apr 2002 18:41:22 +0100
Based on the coil markings given in the Workshop manual - HA12 being a 12v
coil and 16C6 being a 6v coil - I would say your old one is a 6v, which
would be correct for a rubber bumper car, and your new a 12v, which isn't.
You will probably get poor running, even if you can get it to start.

----- Original Message -----
From: "Scott Allen" <scottinarl@hotmail.com>
To: <mgs@autox.team.net>
Sent: Tuesday, April 23, 2002 8:35 PM
Subject: Coil Markings


> Hi,
>
> Doing yearly service on my 74 1/2, and I'm replacing the coil.  The old
one
> and the new one are made by Lucas, but the old one says 15P6 on the top
> while the new one says 11R12.  I'm wondering if I'll run into and problem
if
> I swap them?

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • Coil Markings, Scott Allen
    • Re: Coil Markings, Telewest \(PH\) <=