Head thickness vs. pistons MGB

[Bud Krueger <bkrueger@ici.net>]

It's necessary to bore my 18V engine out to .060".  This has necessitated buying
8.7:1 pistons.  Now the problem (?) -- the head has been milled down to a
thickness of about 3.109".  Anybody care to venture an estimate of the
probability that I'd experience interference between the valves and pistons with
a standard head gasket installed?  TIA.

--
Bud Krueger
http://home.ici.net/~bkrueger/
52TD
77MGB