Many of us in the CT club have made our own, from the idea of one of
the members.
Start with one of those little Rubbermaid drink bottles-there is one
that is about a pint capacity and has flattened sides. Velcro glued to it
allows the bottle to be mounted on the inner fender. Cut off the
protrusion on the top of the bottle and drill to fit the rubber tube from
the radiator. The tube run from the overflow on the radiator to the
bottle is all it takes to hook it up. Some say that you need a radiator
cap that is designed for coolant recovery-some say you don't need this
type of cap. Whatever, the cap to fit the MGB is available anywhere, in
both configurations.
Bob
On Fri, 31 Mar 2000 17:29:43 -0800 (PST) rsexson@excite.com writes:
> Does anyone have a suggestion on where to purchase a coolent recovery
> kit?
>
> R. Sexson
> 74.5 B
>
>
>
>
>
> Get 100% FREE Internet Access powered by Excite
> Visit http://freelane.excite.com/freeisp
>
|