mgs
[Top] [All Lists]

Re: soft top installation

To: PBlstnm@aol.com
Subject: Re: soft top installation
From: Edwin Vaughan <vaughme@mail.auburn.edu>
Date: Wed, 5 May 1999 08:14:46 -0500 (CDT)
On Wed, 5 May 1999 PBlstnm@aol.com wrote:

> very well.  For mine the right size pop rivets is 5/32" (4mm) by 1/2" (12mm). 
>  They're probably the same on yours.

Same size that I used, though I had to drill the hole out to that size.

Edwin
'77 B


<Prev in Thread] Current Thread [Next in Thread>