I believe these attach behind the seats (onto the kick wall) and are used to
fasten the tonneau down snuggly when being used cover only the downed
convertible top. This will work best with the 2 piece frame that goes across
to support the cover. The other half of the snap (the stud) may or may not be
on the kickwall.
Dr. Doug
69 C Rdst
69 C GT
69 B Rdst
71 B GT
-----Original Message-----
From: owner-mgs@autox.team.net On Behalf Of David Hall
Sent: Monday, May 05, 1997 7:13 PM
To: 'Mike Ellsworth'
Cc: 'MGList'
Subject: RE: another Midget mystery part
I also have wondered about this. I think there are supposed to be for
securing
the tonneau when it is in the down position.
Dave
72 BGT
74 Midget
http://www.pacifier.com/~dlhall
-----Original Message-----
From: Mike Ellsworth [SMTP:mikeells@alpha.shianet.org]
Sent: Monday, May 05, 1997 3:49 PM
To: mgs@autox.team.net
Subject: another Midget mystery part
When someone recently asked and got an answer to the plastic tee in the
trunk question, I decided to ask about one which I have wondered about. On
the tonneau cover for my 71 Midget, are 2 tabs about halfway front to back,
and near the center zipper. They are about 2" by 3" and have lift dot
fasteners in the center. What are these for, and what are they supposed to
fasten too? If you don't know, maybe we can think of something.
Mike Ellsworth
71 Midget
|