You are warm......
If you install the bar that fits across the cockpit area behind the
seats, attach the cover to the rear studs, (zip it up), and fold it over
the bar, and stuff the rest of it behind the seats, you will see that the
two tabs would snap nicely over a couple of studs on the kick panel
behind the seats. Unfortunately, the studs are rarely there, but that
won't stop you from installing them. When it is set up right, the cover
is nicely stretched taut behind the seats, and the wind can't get under
it.
Randy Kegg
1958 MGA
1966 Morris Traveller
1964 Porsche 356C (for sale)
David Hall wrote:
>
> I also have wondered about this. I think there are supposed to be for
>securing
> the tonneau when it is in the down position.
>
> Dave
> 72 BGT
> 74 Midget
> http://www.pacifier.com/~dlhall
>
> -----Original Message-----
> From: Mike Ellsworth [SMTP:mikeells@alpha.shianet.org]
> Sent: Monday, May 05, 1997 3:49 PM
> To: mgs@autox.team.net
> Subject: another Midget mystery part
>
> When someone recently asked and got an answer to the plastic tee in the
> trunk question, I decided to ask about one which I have wondered about. On
> the tonneau cover for my 71 Midget, are 2 tabs about halfway front to back,
> and near the center zipper. They are about 2" by 3" and have lift dot
> fasteners in the center. What are these for, and what are they supposed to
> fasten too? If you don't know, maybe we can think of something.
>
> Mike Ellsworth
> 71 Midget
|