You are warm......
If you install the bar that fits across the cockpit area behind the seats,
attach the
cover to the rear studs, (zip it up), and fold it over the bar, and stuff the
rest of it
behind the seats, you will see that the two tabs would snap nicely over a
couple of
studs on the kick panel behind the seats. Unfortunately, the studs are rarely
there,
but that won't stop you from installing them. When it is set up right, the
cover is
nicely stretched taut behind the seats, and the wind can't get under it.
Randy Kegg
1958 MGA
1966 Morris Traveller
1964 Porsche 356C (for sale)
David Hall wrote:
>
> I also have wondered about this. I think there are supposed to be for
>securing
> the tonneau when it is in the down position.
>
> Dave
> 72 BGT
> 74 Midget
> http://www.pacifier.com/~dlhall
>
> -----Original Message-----
> From: Mike Ellsworth [SMTP:mikeells@alpha.shianet.org]
> Sent: Monday, May 05, 1997 3:49 PM
> To: mgs@autox.team.net
> Subject: another Midget mystery part
>
> When someone recently asked and got an answer to the plastic tee in the
> trunk question, I decided to ask about one which I have wondered about. On
> the tonneau cover for my 71 Midget, are 2 tabs about halfway front to back,
> and near the center zipper. They are about 2" by 3" and have lift dot
> fasteners in the center. What are these for, and what are they supposed to
> fasten too? If you don't know, maybe we can think of something.
>
> Mike Ellsworth
> 71 Midget
|