mgs
[Top] [All Lists]

Re: weber problems

To: mgs@autox.team.net
Subject: Re: weber problems
From: JAMES <JBMYERS@msuvx2.memphis.edu>
Date: Tue, 22 Aug 1995 10:42:08 -0500 (CDT)
Robert (mcdonald@San-Jose.ate.slb.com) wrote:

>I am fighting a problem with my 67B.

[silliness generator ON]
No, No, No, what you are _really_ doing is Becoming One With Your LBC.
[silliness generator OFF]

Robert, I've got a similar setup as you have, and know just what you're talking
about. Award-winning cold starts, but then...

Although it seems yours are much worse (or I _am_ the insensitive slob I've
been accused of..) than mine, I've found that pumping the gas once immediately
before cranking, and twice while cranking results in much quicker starts.

I had the exact same problem with a Chrysler slant-six engine, apparently the
carb was a little to far away from the cylinders. The #1 and #6 manifold
runners were over a foot long each, and fuel would drop out of suspension in
the manifold, making starts more difficult. When cold, the choke compensates,
and it's not a problem. 

BTW, did the heat shield have any effect? I've been told that SU's need lots of
heat shielding, but Webers like to run hot.

James "glad to NOT own a chrysler" B.
"71 MGB
'71 LeSabre

<Prev in Thread] Current Thread [Next in Thread>