Thanks Paul. I thought I had read something from you about this about a
year ago. But I couldn't find it in my personal archives and ... Well
... I don't think Mark has an archive system for this list anymore.
Larry
> -----Original Message-----
> From: owner-mgb-v8@autox.team.net
> [mailto:owner-mgb-v8@autox.team.net] On Behalf Of
> paul.hunt1@virgin.net
> Sent: Sunday, February 24, 2002 4:45 AM
> To: Larry Hoy; mgb-v8@autox.team.net
> Subject: Re: V8 rubber engine mounts ... again
>
>
> Low. It's the only way you'll be able to get them into the
> (standard) chassis slots anyway. Even then I find I have to
> twist the engine to get one in, then twist it the other way
> to do the other. I then make sure they are positioned evenly
> both sides, use a drift to tap the end-plate that rests on
> the chassis down a bit to remove some of the shear stresses,
> and add the approrpriate shims.
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|