mgb-v8
[Top] [All Lists]

Re: Lower radiator hose

To: Larry Hoy <larryhoy@prodigy.net>
Subject: Re: Lower radiator hose
From: Jim Stuart <jimbb88@erols.com>
Date: Sun, 13 Aug 2000 00:33:35 -0400
Cc: MG V8 List <mgb-v8@autox.team.net>
References: <NCBBJIKHPENAOIEIMKILKEIHEHAA.larryhoy@prodigy.net>
Reply-to: Jim Stuart <jimbb88@erols.com>
Sender: owner-mgb-v8@autox.team.net
Use 2 pieces of hose connected by a piece of copper or stainless pipe.

Jim Stuart
(who owns a box of cut up radiator hoses & 2' of 1.25 stainless pipe)

Larry Hoy wrote:

> Help.  Anyone out there have a part number for a hose that fits?
>
> Here are the details.
>
> I have an MGB V8 radiator (outlet on the lower right side 1.25")
>
> An oil filter adapter from Dan LeGrue (sp?).
>
> A Buick 300 water pump (outlet 1.5")
>
> and a Dan LeGrue alternator bracket (hangs on the right head).
>
> Lots of stuff over on the right side.
>
> I found a universal hose that is 1.25" on one end and 1.5" on the other, 19.5"
> long.  That thing will work but it rubs everywhere.  I was hoping someone out
> there has found a hose for some other vehicle that is preformed which will fit
> this application.
>
> Anyone?
>
> Larry Hoy


<Prev in Thread] Current Thread [Next in Thread>