Had the same problem one time. Wrong filter in the correct box!
Phil
----- Original Message -----
From: "Mike Eldred" <redscirocco@hotmail.com>
To: <mg-t@autox.team.net>
Sent: Thursday, December 04, 2008 3:01 PM
Subject: [Mg-t] Oil filter problem
> Hello all,
> This seems so ridiculous I'm almost too embarassed to hit "send," but I
> recently changed the oil and filter in my '54 TF 1250, as I've done
> successfully a dozen times before, and can't seem to get the filter cover
> to
> seat correctly. When I start the car, oil comes running out of the filter
> assembly. If I tighten the center bolt, it gushes out. If I loosen the
> bolt,
> it continues to run out. I did remove the old rubber ring seal and put
> in
> the appropriate replacement. Even tried swapping the old one back in.
>
> Anyone have any ideas?
>
> I used a Napa 1300 filter, by the way. Anyone have trouble with these? I
> have picked up a Wix 51300 in case the problem is the Napa filter.
>
> Thanks for any advice.
>
> Cheers,
> -Mike Eldred
> -Wilmington, VT
>
>
> _________________________________________________________________
> Send e-mail anywhere. No map, no compass.
> http://windowslive.com/Explore/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_anywhere
> _122008
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
--
I am using the free version of SPAMfighter.
We are a community of 5.7 million users fighting spam.
SPAMfighter has removed 134 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|