<<<Snip>>>
Roy Jacobson wrote an article on heater installation in the June 1994
issue
of TSO. Complete with two pictures....his installation is a little
different than others I've seen.
Terry in Oakland
<<<Snip>>>
If that's the one where the HOT water comes off the thermostat housing,
that's the correct one. Using the back of the head results in colder
water to the heater. Study carefully the water flow of the XPAG and you
will see that the water at the back of the head has come directly from
the radiator, through the pump to the back of the cylinder head. The
hottest water is at the FRONT of the heard.
Regards,
Blake
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|