mg-t
[Top] [All Lists]

Re: Heater installation in an MG TF

To: yd3@nvc.net
Subject: Re: Heater installation in an MG TF
From: TATERRY@aol.com
Date: Thu, 21 Apr 2005 09:49:14 EDT
In a message dated 4/20/2005 9:34:37 PM Pacific Standard Time, yd3@nvc.net 
writes:


> If that's the one where the HOT water comes off the thermostat housing,
> that's the correct one.  Using the back of the head results in colder
> water to the heater.  Study carefully the water flow of the XPAG and you
> will see that the water at the back of the head has come directly from
> the radiator, through the pump to the back of the cylinder head.  The
> hottest water is at the FRONT of the heard.
> 

Yes, thats the one...from the front.
Terry

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>