Re: L type clutch question

["Peter Green" <p.green@mgk3.co.uk>]

Bill,

Yes the pins should be hardened.

I have a spare clutch and the release pins in that are 5/16" dia and 1.7/32" 
long.

Regards,

Peter Green.



----- Original Message ----- 
From: "William Putnam" <1933mgj2@sbcglobal.net>
To: <mg-mmm@autox.team.net>
Sent: Sunday, January 16, 2005 5:03 AM
Subject: L type clutch question


> Greetings,
>
> These questions refer to an L-type clutch.  The part in question is the
> release pin.  These are the pins that are actuated by the release fingers.
> The pins sit in the clutch cover plate.
>
> Should the pins be hardened?
>
> How long should they be?
>
>
>
> Thank you,
>
> Bill Putnam
>
> ///  unsubscribe/change address requests to majordomo@autox.team.net  or
> try
> ///  http://www.team.net/cgi-bin/majorcool
> ///  http://www.team.net/mailman/listinfo
> ///  Archives at http://www.team.net/archive/mg-mmm
> ///  Send list postings to mg-mmm@autox.team.net
///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net