Hello Jack,
I had a look too in the N-type spare parts lists,
and could not find any clips in relation to the toolbox.
As the wooden handle of the tyrepump is not removable
like the handle for the jack-rods, I would think that the pump
had to be stored somewhere in the luggage compartment.
Another problem is the storage of the starting handle,
as the original one is slightly to long for the toolbox.
To overcome that difficulty, I found on more than my own
N-type, a hole cut of 1x1 inch, at the left side front corner,
at the bottom of the toolbox.
Through this hole the overlength of the handle looks out.
My N is a ND, but possibly that was a common feature.
Cheers, Gerhard (NA 0468)
>>-----Original Message-----
>>From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net]On
>>Behalf Of simpsonapp
>>Sent: Saturday, November 29, 2003 9:58 PM
>>To: mg-mmm@autox.team.net
>>Subject: N-Type Tools
>>
>>
>>Does anyone know where the tyre pump was originally stored on an NA two
>>seater? There are holes for clips in my tool box, but the pump I have is
>>slightly long for a good fit. Is there a drawing available for the
>>placement of various clips in the tool box to hold the jack, etc.?
>>Thanks.-Jack
>>
>>/// unsubscribe/change address requests to majordomo@autox.team.net or try
>>/// http://www.team.net/cgi-bin/majorcool
>>/// http://www.team.net/mailman/listinfo
>>/// Archives at http://www.team.net/archive/mg-mmm
>>/// Send list postings to mg-mmm@autox.team.net
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|