Re: MG PB Midget Pistons NEW on EBAY

["J.E.A.Rich" <mmmbob@adelphia.net>]

Bob,

The standard bore on a J2 was 57mm, if yours is less than that it must never
have been bored correctly. I would not recommend boring it to 60mm.

The PA was also originally 57mm, but with care it can be bored to 60mm. This
is how the PB started. This increases the capacity from 847cc to 939cc.

Cheers, "Bob".

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net