Re: Traction Control

[Dave Dahlgren <ddahlgren@snet.net>]

You don't need to hook to wheel speeds. An accelerometer and a slew rate rev
limiter will do the job just fine.. Or rather than rev limit you pull timing out
as well. The ones you can hear use rev limiting a little crude as it can upset
the chassis unlike the ones that pull timing out..
Dave

John Goodman wrote:
> 
> Bill, the only problem I see here is if your MSD is
> communicating with data acquisition from wheel RPM
> sensors. If the driver is in manual control of the
> retard feature, what's the harm?
> 
> John

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive