land-speed
[Top] [All Lists]

Re: lakester frame

To: <Want1937hd@aol.com>, <albaugh_neil@ti.com>, <ardunbill@webtv.net>,
Subject: Re: lakester frame
From: "glen barrett" <speedtimer@charter.net>
Date: Fri, 7 Dec 2001 16:08:01 -0800
Just to add a little to the world of tubing there was a belly tank lakester
built by Hoffman & Markley that was bird cage construction inside the tank
body. The car is now owned by John Swanson and has a OFFY on board. The
chassis was upgraded in the roll cage area to meet the current rules and
should run at the May 2002 meet.
Glen
----- Original Message -----
From: <Want1937hd@aol.com>
To: <albaugh_neil@ti.com>; <ardunbill@webtv.net>;
<land-speed@autox.team.net>
Sent: Friday, December 07, 2001 3:49 PM
Subject: Re: lakester frame


>     For those on the list that haven't seen a Maserati "Birdcage" the
chassis
> was made up of 1/2 tube, lots of it. It got the nickname when somebody
said a
> bird couldn't fly out of it. Not being picky Neil but they were Typo 60 &
> 61's They had a laydown twincam four cylinder engine. I got to trailer a
few
> around for a guy back in the 1970's. Bob,hanging the outside lights in
> connecticut
>
>
> > The guys who fabricated the Tipo 63 (?) "Birdcage" Maserati chassis must
> > have been commited to a lunatic asylum after a few weeks of that work.

///
///  land-speed@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe land-speed
///
///  or go to  http://www.team.net/cgi-bin/majorcool
///
///


<Prev in Thread] Current Thread [Next in Thread>