Hi Harold,
The info. helps. I have shim stock of various thickness for different
purposes. The metallurgy is easy.
Thanks,
John
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Harold
Manifold
Sent: Sunday, August 20, 2017 11:09 AM
To: 'Bob Spidell' <bspidell at comcast.net>; healeys at autox.team.net
Subject: Re: [Healeys] Making wheel bearing shims
Hello,
I am in the process of restoring a Mark 1 BT7. I have what appears to be
original BMC shims and replacements I recently purchased from AH Spares.
These are the dimensions:
AH Spares 22.4mm x 30.2mm (0.882" x 1.189")
BMC 22.7mm x 32.3mm (0.894" x 1.272")
Unless you are a Metallurgist I would not suggest making shims. Matching the
dimensions is easy, matching the tensile strength, wear performance and
steel chemistry is hard.
I trust this helps,
Harold
_____
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob
Spidell
Sent: Sunday, August 20, 2017 8:37 AM
Subject: Re: [Healeys] Making wheel bearing shims
McMaster-Carr has a large variety of shims:
https://www.mcmaster.com/#standard-shims/=190um7n
Of course, you'd need to know the ID and OD.
Bob
--------------------------------
Bob Spidell - San Jose, CA
On August 20, 2017 at 4:09 PM goldengt <goldengt at cal.net
I figured the edges get squeezed flat so it doesn't matter. Seemed to work
in the bad old days when we couldn't get new.
Ken Freese
65 BJ8
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
>
Date: 8/20/17 7:11 AM (GMT-07:00)
Subject: Re: [Healeys] Making wheel bearing shims
John,
Is Moss just out of stock? They're shown on their web page, item 121,
part numbers 263-1[4567]5.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28887
I'd also be interested in hearing about any experiences making shims -
especially how they kept the edges flat.
Cheers,
Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 08/20/2017 01:44 AM, John Spaur wrote:
> Has anyone made the front axle stub wheel bearing shims? I have bought
> them before but was curious about making them because you never know
> what size shim will be needed during a bearing repack. Moreover, it
> appears Moss has them for a BJ8 but not a MKII BT7.
>
> John Spaur
>
> San Jose, CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170820/e766a330/attachment.html>
|