I was fixated on the BJ8 kit where you get 12 shims for what 3 would cost for a
BT7.
John
From: goldengt [mailto:goldengt at cal.net]
Sent: Sunday, August 20, 2017 7:09 AM
To: Bob Haskell <rchaskell at earthlink.net>; John Spaur <jmsdarch at
sbcglobal.net>; healeys at autox.team.net
Subject: Re: [Healeys] Making wheel bearing shims
I figured the edges get squeezed flat so it doesn't matter. Seemed to work in
the bad old days when we couldn't get new.
Ken Freese
65 BJ8
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
Date: 8/20/17 7:11 AM (GMT-07:00)
Subject: Re: [Healeys] Making wheel bearing shims
John,
Is Moss just out of stock? They're shown on their web page, item 121,
part numbers 263-1[4567]5.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=28887
I'd also be interested in hearing about any experiences making shims -
especially how they kept the edges flat.
Cheers,
Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
On 08/20/2017 01:44 AM, John Spaur wrote:
> Has anyone made the front axle stub wheel bearing shims? I have bought
> them before but was curious about making them because you never know
> what size shim will be needed during a bearing repack. Moreover, it
> appears Moss has them for a BJ8 but not a MKII BT7.
>
> John Spaur
>
> San Jose, CA
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell
> at earthlink.net
>
_______________________________________________
Archive: http://www.team.net/archive
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170820/dc21c49c/attachment.html>
|