[Healeys] Making wheel bearing shims

healeys

[Healeys] Making wheel bearing shims

Subject:	[Healeys] Making wheel bearing shims
From:	jmsdarch at sbcglobal.net (John Spaur)
Date:	Sat, 19 Aug 2017 22:44:42 -0700

Has anyone made the front axle stub wheel bearing shims? I have bought them
before but was curious about making them because you never know what size
shim will be needed during a bearing repack. Moreover, it appears Moss has
them for a BJ8 but not a MKII BT7.

 

John Spaur

San Jose, CA

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170819/b00f00f1/attachment.html>

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] Making wheel bearing shims, John Spaur <= [Healeys] Making wheel bearing shims, Bob Haskell [Healeys] Making wheel bearing shims, goldengt [Healeys] Making wheel bearing shims, John Spaur [Healeys] Making wheel bearing shims, Bob Spidell [Healeys] Making wheel bearing shims, Harold Manifold [Healeys] making wheel bearing shims, Frank Magnusson [Healeys] Making wheel bearing shims, John Spaur [Healeys] Making wheel bearing shims, John Spaur

Previous by Date:	[Healeys] New Blog Post... Identifying BN1 gears, Mark Donaldson
Next by Date:	[Healeys] BN2 Rear Brake Drums, Michael MacLean
Previous by Thread:	[Healeys] antifreeze, Bob Spidell
Next by Thread:	[Healeys] Making wheel bearing shims, Bob Haskell
Indexes:	[Date] [Thread] [Top] [All Lists]