OK, I am now told by my transmission rebuilder not to use the BN1 angle drive
because the cable end of the drive is a different size thread than the 4 speed
transmission.Mike MacLean
On Wednesday, August 16, 2017 11:15 AM, Bob Spidell <bspidell at
comcast.net> wrote:
Moss lists it in their catalog.? Pricey as hell--$229.99--but they should
have them.? Part# 768-020.
On 8/15/2017 7:22 PM, Michael MacLean wrote:
I need the speedo angle drive unit that screws into the overdrive for my
transmission rebuild going on right now.? There are no angle drives available
for the BN2 4 speed side shift trans so the big retailers are offering the BN1
speedo angle drive for the BN2 transmission.? Since the gearing is different,
will the speedo be off because of this?? Will I merely need to get the speedo
re-calibrated? Mike MacLean
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170816/15a390ec/attachment.html>
|