On that archives search you will find the address at the bottom of the page.
Click on www.team.net/archive. Next click on "Healeys" and then search
"Engine Rebuilding" (I doubt if "Lump Rebuilding" with get you anything but
you never know).
Dan
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of RAWDAWGS@aol.com
Sent: Saturday, January 10, 2009 7:12 PM
To: healeys@autox.team.net
Subject: [Healeys] Pistons
Bad news. Was trying to get my BN4 that has been setting for years to start
and noticed a stuck valve. Thought maybe get here running and a temp cycle
will free it up. Then noticed a bent pushrod and thought might as well pull
the
head. Did that and noticed the No 1 and 6 pistons are burned. Just a little
at the edge.(I will post some pictures tomorrow). So it looks like I am
going
to need some advice.I am thinking about changing the pistons, with the
engine
in the car. My questions:
1. Am I crazy not to pull the lump and completely rebuild?
2. Who is the list favorite piston supplier currently?
3 No lead head? Yea or nay.
4 Wasn't there a guy rebuilding rocker assemblies? Need contact info
Sorry to bomb the list but I couldn't figure out how to search the archives
Thanks Scott
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100000075x1215855013x1201028747/aol?redir=htt
p://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as dan@warner-associates.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|