I couldn't find the carpet pics but the dioramas were fantastic.
Mark
----- Original Message -----
From: "John Sims" <ahbn6@optonline.net>
To: "'Rich C'" <richchrysler@quickclic.net>; <Healeys@autox.team.net>;
<Fiat500f@aol.com>
Sent: Friday, July 21, 2006 12:07 PM
Subject: RE: 100-4 assembly advice please...
> OK Photos are on my web site
>
> John Sims, BN6
> Aberdeen, NJ
>
> www.healey6.com
>
>
>
> -----Original Message-----
> From: Rich C [mailto:richchrysler@quickclic.net]
> Sent: Friday, July 21, 2006 8:07 AM
> To: Healeys@autox.team.net; Fiat500f@aol.com
> Cc: John Sims
> Subject: Re: 100-4 assembly advice please...
>
> Paul,
> Is it a BN1 or BN2?
>
> Either way there are 3 phillips head trim screws per vertical side, not
> 4.
>
> If you can't find the original screw holes, fit up and predrill the panel
> before the carpet is installed noting the locations by making a paper
> template or whatever. Then trim the carpet onto the panel. Once the carpet
> is on. come back with a needle to find the holes, open them up with an awl
> and install the panel into the car.
>
> Rich Chrysler
|