Esko,
The string approach works. I have done it in as little as 2 minutes or as
little as 2 hours! Can be real frustrating. If you wish removal of the
bullets will work. As Rick noted the lengths of wires with bullets must be
staggered if you hope to get it through intact.
Keith Pennell
> Is there a trick to pulling the wiring for the turn signal and horn back
> into the stator tube? I pulled a string up through when taking off the
> control head assembly but can't get the wiring to start back down. Is it
> okay/feasible to take off the end wire tips and solder them back on after
> pulling the bare wires? Thanks
>
> Esko
> BJ7
|