Re: Reinserting the wiring in the steering stator tube?

[WilKo@aol.com]

The connectors should be at different lengths of wire so they can be inserted
single-file like. that's the only real "trick" to it.

In a message dated 4/4/04 8:36:57 PM, enmcate@comcast.net writes:


> Is there a trick to pulling the wiring for the turn signal and horn back
> into the stator tube?  I pulled a string up through when taking off the
> control head assembly but can't get the wiring to start back down.  Is it
> okay/feasible to take off the end wire tips and solder them back on after
> pulling the bare wires?  Thanks
>
> Esko
> BJ7