fot
[Top] [All Lists]

[Healeys] distributor cap

Subject: [Healeys] distributor cap
From: rchaskell at earthlink.net (Bob Haskell)
Date: Fri, 21 Apr 2017 15:35:37 -0400
References: <58FA1350.70002@earthlink.net> <7C181A06BFB74F41BA6B85AEB2B0E556@DavidNockHP>
David,

The instruction manual suggested the same.  I wasn't sure how well the 
carbon wire would work with the screw style cap.  Thanks.

Cheers,

Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php

On 04/21/2017 01:06 PM, David Nock BCS wrote:
> Bob, Make a carbon wire to install when setting the timing on the #1
> plug wire. The replace it with the copper core wire to drive the car.
>
> This on the only way I have found to check the timing here in the shop
>
>
>
> David Nock
> British Car Specialists
> 209-948-8767
> www.britishcarspecialists.com
>
>
>
> -----Original Message----- From: Bob Haskell
> Sent: Friday, April 21, 2017 7:12 AM
> To: Healey List
> Subject: [Healeys] distributor cap
>
> Listers,
>
> I bought a used Snap On timing light and the instructions state that it
> doesn't work with solid copper core spark plug wires.  It doesn't.  As
> the carbon wires don't work well with the screw terminals in the
> distributor cap, I was wondering if there was a cap for the DM6A
> distributor for push on plug wires.
>
>
> Cheers,
>
> Bob Haskell
> AHCA 3000 MkI registrar
> http://www.ciahc.org/registry_3000mk1.php
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net
>

<Prev in Thread] Current Thread [Next in Thread>