fot
[Top] [All Lists]

[Healeys] distributor cap

Subject: [Healeys] distributor cap
From: healeydoc at sbcglobal.net (David Nock BCS)
Date: Fri, 21 Apr 2017 12:28:12 -0700
References: <58FA1350.70002@earthlink.net> <7C181A06BFB74F41BA6B85AEB2B0E556@DavidNockHP>
The other option would be on a BJ8 you can use the TR6 distributor cap and 
carbon wires.



David Nock
British Car Specialists
209-948-8767
www.britishcarspecialists.com
-----Original Message----- 
From: David Nock BCS
Sent: Friday, April 21, 2017 10:06 AM
To: Healey List ; Bob Haskell
Subject: Re: [Healeys] distributor cap

Bob, Make a carbon wire to install when setting the timing on the #1 plug
wire. The replace it with the copper core wire to drive the car.

This on the only way I have found to check the timing here in the shop



David Nock
British Car Specialists
209-948-8767
www.britishcarspecialists.com



-----Original Message----- 
From: Bob Haskell
Sent: Friday, April 21, 2017 7:12 AM
To: Healey List
Subject: [Healeys] distributor cap

Listers,

I bought a used Snap On timing light and the instructions state that it
doesn't work with solid copper core spark plug wires.  It doesn't.  As
the carbon wires don't work well with the screw terminals in the
distributor cap, I was wondering if there was a cap for the DM6A
distributor for push on plug wires.


Cheers,

Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php
_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net

_______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/healeydoc at sbcglobal.net 


<Prev in Thread] Current Thread [Next in Thread>