In the Triumph Service Instruction Manual, 0.001" to 0.003" is recommended.
Maybe steel valve guides will cause no problems,but I believe bronze guides
should be reamed to the original size after fitment
Marcel
-----Oorspronkelijk bericht-----
Van: Fot [mailto:fot-bounces@autox.team.net] Namens Michael Moore
Verzonden: donderdag 19 juni 2014 14:21
Aan: FOT
Onderwerp: [Fot] TR4 Valve Guide Clearance
Is there a recommended clearance for valve guides? I may have a valve
sticking.
Engine builder just put in oversized valves and new guides.
Thanks
Mike
62 TR4, Race car
63 TR4, Street car
Mike & Becky Moore
6050 Ruhl Road
Fairview, PA 16415
[demime 1.01d removed an attachment of type image/gif which had a name of
image001.gif] _______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|