FoT,
Good Parts sells them for the TR6 and they are ready to bolt on. Only
need to align pulley's.
Allen
On Dec 3, 2013, at 12:42 PM, Tony Drews wrote:
> Who is the source for the ATI dampers? I switched to the Moss style
> one a year ago after an older model (different design) came apart.
>
> Thanks, Tony Drews
>
> At 12:30 PM 12/3/2013, Sam Halkias wrote:
>> Stick with the ATI damper. They can put the timing marks in the
>> proper
>> position for a 4 , 6 or 8 cylinder, just send it to them. I use ATI
>> dampers on
>> full race and street engines, could not be happier. Yes they do
>> cost $$$$ but
>> it will pay for itself over the long run.
>>
>> Sam H.
>>
>> > On Dec 3, 2013, at 1:14 PM, toodamnfunky@comcast.net wrote:
>> >
>> > FoT
>> >
>> > I have the Moss B= pulley and belt conversion with the rubber
>> joint on the
>> > crank pulley/dampener.
>> >
>> > Kas warned me at Elkhart lake that these can separate and with
>> that I would
>> > like to explore higher quality
>> >
>> > crank dampeners. We installed an ATI super damper on Mark Edenbs
>> car and
>> > there are three things about it I donbt like.
>> >
>> > 1. Cost + $ 500.00
>> > 2. They are not clocked correctly for the TR4 and a new timing
>> pointer
>> > needs to be fitted in a less than ideal position.
>> > 3. With the engine installed there is only B<b clearance to
>> the steering
>> > rack.
>> >
>> >
>> >
>> > B
>> >
>> > So with that I have been looking at OEM and aftermarket dampeners/
>> balancers
>> > for other cars but I just donbt know
>> >
>> > enough about machining to determine if it would be worth trying
>> to machine
>> a
>> > balancer from another make to fit the TR4.
>> >
>> > B
>> >
>> > While on the subject of pullies in general Ibm wondering what
>> others have
>> > done with non-Triumph parts.
>> >
>> > I would prefer a serpentine belt. I know I could fit a good quality
>> tensioner
>> > but still stuck on fitting non-triumph pullies
>> >
>> > to the TR-4.
>> >
>> > Can anyone advise on this subject ?
>> >
>> > Thanks,
>> >
>> > jim g
>> > _______________________________________________
>> > fot@autox.team.net
>> >
>> > http://www.fot-racing.com
>> >
>> > Donate: http://www.team.net/donate.html
>> > Archive: http://www.team.net/archive
>> > Forums: http://www.team.net/forums
>> > Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/atr6racer@hotmail.com
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/awashatko@wi.rr.com
>
>
Jody & Allen Washatko
W51 N664 Highland Drive
Cedarburg, WI. 53012
USA
tel. (262) 617-6801
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|