And on a related note - does anyone have a narrow belt alloy water pump pulley
to sell?
Thanks
Dennis
-----Original Message-----
From: "BillDentin@aol.com" <BillDentin@aol.com>
Sent: b12/b3/b2013 12:50 PM
To: "tony@tonydrews.com" <tony@tonydrews.com>; "atr6racer@hotmail.com"
<atr6racer@hotmail.com>; "toodamnfunky@comcast.net"
<toodamnfunky@comcast.net>
Cc: "fot@autox.team.net" <fot@autox.team.net>
Subject: Re: [Fot] aftermarket crank dampeners and pullies for TR4's
In a message dated 12/03/2013 12:42:39 PM Central Standard Time,
tony@tonydrews.com writes:
> Who is the source for the ATI dampers? I switched to the Moss style
> one a year ago after an older model (different design) came apart.
>
I am not sure whose harmonic damper it is, but I believe we got ours from
Ken Gillanders (British Frame & Engine) many, many years ago. I assume it
came from the UK. We've never had any issues.
Seems like I recall this tread on the FOT list quite a few years ago, and
didn't some folks feel that that harmonics was a much bigger issue on the six
cylinder engines, and not critical on the fours.
Bill Dentinger
Bill Dentinger
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/yellow-green@sbcglobal.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|