fot
[Top] [All Lists]

Re: [Fot] Exhaust Header

To: "'Todd Redmond'" <alfetta95@optonline.net>, <FOT@autox.team.net>
Subject: Re: [Fot] Exhaust Header
From: "john hasty" <jhhasty@gdhs.com>
Date: Tue, 29 Oct 2013 14:56:00 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <63718fb7.663c.1420584cb1d.Webtop.53@optonline.net>
Thread-index: Ac7U12xHcK9waxU9Q2iJqiRbT/kjkQAAJDaw a=4XwCEAaBuO8A:10 a=kj9zAlcOel0A:10 a=mkkZP590AAAA:8 a=XmFt0dmJvDwA:10 a=zOoktvdPAAAA:8 a=JcvzPq48AAAA:8 a=kO84ycaYm-wtF8Srey0A:9 a=CjuIK1q_8ugA:10 a=J0aUVQLP0FIA:10 a=qtyMPpPvNdoA:10 a=JFLLmj4W_BAA:10 a=JgL6sTUlBcsA:10 a=0vksvMZRuTEA:10 a=Ki9j9A26RgQA:10 a=m3MdUl94G8cA:10 a=uWM2GsfHPyAA:10 a=LuNFSA0Xe1kA:10 a=fh7p6wh_LT3ogFVC:21 a=Cm_rfBWM9qF0JNRU:21 a=B8rx5kvwQHCoTlY5PM2Gsg==:117 reip=0.000, cl=1, cld=1, fgs=0
Stahl...be sure and have them send the engine plate first so you can match
to your head.  Their pattern is off quite a bit.  I also specified 16 ga
tubes.  They are really very nicely made and only a very slight modification
of the frame was needed at the collector.   It will cost you the better part
of $800.00...........


John H. Hasty
Attorney At Law
Guthrie, Davis, Henderson & Staton, P.L.L.C.
719 East Boulevard
Charlotte, North Carolina 28203-5113
Tele: (704) 372-5600
Fax: (704) 372-4601
E-mail: jhhasty@gdhs.com
www.gdhs.com
 
PRIVILEGE AND CONFIDENTIALITY NOTICE:  This message (and any attachments) is
intended only for the use of the addressee and may contain information that
is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please erase all copies of the message
and its attachments and notify us immediately.  Thank you.
 
IRS CIRCULAR 230 NOTICE:  In order to comply with certain IRS regulations
regarding tax advice, we inform you that, unless expressly stated otherwise,
any tax advice contained in this communication (including any attachments)
is not intended or written to be used, and cannot be used, for purposes of
(i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
marketing or recommending to another party any transaction or matter
addressed herein.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Todd Redmond
Sent: Tuesday, October 29, 2013 2:41 PM
To: FOT@autox.team.net FOT@autox.team.net
Subject: [Fot] Exhaust Header

Friends


Looking for a header for the TR3. What are you using and where did you get
it?


4 into 1 is preferred


Thanks
Todd
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>