Just checked the Stahl website.
They have a header listed for a TR4 under the road race section at
$555.00.
Am i correct in assuming that the TR3 and TR4 header is the same?B
This is for a race motor with a high port head.
BTW The website says that they are closing the business at the end of
2013.
Todd
On Tue, Oct 29, 2013 at 02:56 PM, john hasty wrote:
> Stahl...be sure and have them send the engine plate first so you can
> match
> to your head. Their pattern is off quite a bit. I also specified 16
> ga
> tubes. They are really very nicely made and only a very slight
> modification
> of the frame was needed at the collector. It will cost you the
> better part
> of $800.00...........
>
>
> John H. Hasty
> Attorney At Law
> Guthrie, Davis, Henderson & Staton, P.L.L.C.
> 719 East Boulevard
> Charlotte, North Carolina 28203-5113
> Tele: (704) 372-5600
> Fax: (704) 372-4601
> E-mail: jhhasty@gdhs.com
> www.gdhs.com
> PRIVILEGE AND CONFIDENTIALITY NOTICE: This message (and any
> attachments) is
> intended only for the use of the addressee and may contain information
> that
> is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK
> PRODUCT.
> If you are not the intended recipient, you are hereby notified that
> any
> dissemination of this communication is strictly prohibited. If you
> have
> received this communication in error, please erase all copies of the
> message
> and its attachments and notify us immediately. Thank you.
> IRS CIRCULAR 230 NOTICE: In order to comply with certain IRS
> regulations
> regarding tax advice, we inform you that, unless expressly stated
> otherwise,
> any tax advice contained in this communication (including any
> attachments)
> is not intended or written to be used, and cannot be used, for
> purposes of
> (i) avoiding penalties under the Internal Revenue Code or (ii)
> promoting,
> marketing or recommending to another party any transaction or matter
> addressed herein.
> -----Original Message-----
> From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net]
> On
> Behalf Of Todd Redmond
> Sent: Tuesday, October 29, 2013 2:41 PM
> To: FOT@autox.team.net FOT@autox.team.net
> Subject: [Fot] Exhaust Header
>
> Friends
>
>
> Looking for a header for the TR3. What are you using and where did you
> get
> it?
>
>
> 4 into 1 is preferred
>
>
> Thanks
> Todd
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|