Well Duncan, we'll know all about them once you buy a set and try them. Please
give us a report back. I'm slightly leary, while trying not to be too critical,
but, they don't know what they have. They label their TRI-TR6 rods as being for
Spit 1500, Late Spit 1300, GT6, and TR6. I do believe the rods for each of
these engines is a different length. A 1500 may fit a TR6, but a GT6 is
different as is the 1300.
Of course, until we all started buying Pauter rods they were an unknown too!
Let us know.
-Ed-
--- On Thu, 6/16/11, Duncan Charlton <duncan.charlton54@gmail.com> wrote:
From: Duncan Charlton <duncan.charlton54@gmail.com>
Subject: [Fot] Chinese H-beam TR rods
To: "fot" <fot@autox.team.net>
Date: Thursday, June 16, 2011, 8:02 PM
Has anybody had experience with connecting rods from maxspeedingrods?
http://tinyurl.com/3wmuk6d
$520.16 a set (with ARP bolts) for a TR motor on their ebay page here:
http://tinyurl.com/3cu5r89
Duncan
(Texas)
1952 Morgan Plus 4 #6
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|