spring rate doesn't change when you shorten a spring unless it's progressively
wound.
On Mar 25, 2010, at 5:35 AM, Kramer, Robert wrote:
> Is there a formula to determine spring rates when you shorten a spring? The
> Afco 2 5/8" springs that Greg Blake has pointed out come in 8, 10, 12 and
14
> inch free lengths. I want a 9" free length spring to keep my ride height. If
I
> buy a 700 lb 10" spring and cut off an inch I would guess at a rate
somewhere
> around 800 lb rate.
>
> Bob Kramer
> Sales Manager
> RDO Equipment Company
> 16415 N. IH 35
> Pflugerville, TX 78660
> 512-272-4141
>
> -----Original Message-----
> From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf
> Of MadMarx
> Sent: Thursday, March 25, 2010 9:46 AM
> To: 'Friends'
> Subject: [Fot] WG: Paging Tom Krieger re: rear springs
>
> _______________________________________________
> fot@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com
_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|